Telemecanique 24V Thermal Overload Relay for Agreed Payment Modes

• Customization: Available
• Theory: Electromagnetic Relay
• Usage: Household Appliances Relay, for Energy-Saving, Remote Control, Energy Meter
• Model NO.: IM-M2001
• Phase: 2
• Electricity Type: Dc
• Number of Pole: 2
• Load: High Power Relay
• Protective Characteristics: Enclosed Relay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Product Name: 24V Thermal Overload Relay
• Contact Material: Agsno2
• Rated Load: 200A, 250VAC
• Coil Voltage: 6~48VDC
• Color: Black
• Transport Package: Cartons/Pallet
• Specification: TBD
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Basic Data	Dimension(mm)		79.5×54×26
	Weight ( g )		≈208g
	Contact Arrangement		2A/2B
	Contact Material		AgSnO2
	Ambient Temperature		-45~+85ºC
	Vibration		10~50Hz,0.75mm
	Shock		1000m/s²,(100g)
Specification Data	Nominal Voltage		16VDC
	Power Consumption		<1.5W
	Operating Voltage		16V
	Max. Motor Voltage		48V
	Max. Switching Current		200A
	Surge Current		3000A/10ms
	Motor Resistance(R±20%)		55Ω
	Contact Voltage		<60mV
	Contact Resistance		<0.6mΩ
	Dielectric Strength	Motor to Contact	>4000VAC   1min
		Across Open Contact	>2000VAC   1min
	Electrical Life		>10000cycles
	Mechanical Life		>100000cycles
	Pulse Time		100ms~150ms
	Picking-up Time		<65ms
	Release Time		<65ms
	Insulation Resistance		>1000MΩ(500VDC)

          Cautions of Latching Relay:

             1.Suggestions of relay's input
            (1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,

            you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.

            (2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5

            times or 2 times of value or lower driving condition plz confirm with our engineer.
            (3)Relays'contact status may be changed during transportation or installation due to impact of external force,
            therefore please reset to the required status.

 

            2.Suggestions of relay's output
            (1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after

            the installation.

            (2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is

            fastened and prevent relay from damages or other safety problems due to temp. Rise..

            (3)The sampling signal wires of products are limited, please do not pull or torque during installation.