General Purpose Mini Smart 12V 80A Digital Motor Electronics Relay

• Customization: Available
• Theory: Electromagnetic Relay
• Usage: Household Appliances Relay, for Energy-Saving, Remote Control, Energy Meter
• Model NO.: IM-M1002
• Electricity Type: Dc
• Number of Pole: 1
• Load: High Power Relay
• Protective Characteristics: Enclosed Relay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Contact Material: Agsno2
• Rated Load: 80A, 250VAC
• Coil Voltage: 9VDC
• Color: Black
• Transport Package: Cartons/Pallet
• Specification: 26.5*23.5*15mm
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Basic Data	Dimension(mm)		26.5×23.5×13.8
	Weight ( g )		≈40g
	Contact Arrangement		1A/1B
	Contact Material		AgSnO2
	Ambient Temperature		-20~+55ºC
	Vibration		10~55Hz,1.5mm
	Shock		1000m/s²,(100g)
Specifications Data	Rated Voltage		9V
	Power Consumption		<3W
	Max. Motor Voltage		18V
	Max. Switching Current		80A
	Surge Current		6000A/10ms
	Motor Resistance		14±2Ω
	Contact Rating(Res)		250VAC,80A
	Contact Voltage		60mV
	Contact Resistance		<=1.0mΩ
	Dielectric Strength	Motor to Contact	4000VAC,50/60Hz 1min
		Across Open Contact	2000VAC,50/60Hz 1min
	Electrical Life(120 cycles/H)		5,000
	Mechanical Life(3600 cycles/H)		100,000
	Pulse Time		Advise 30ms~40ms
	Picking-up Time(@9V)		<=25ms
	Release Time(@9V)		<=25ms
	Insulation Resistance		>=1000MΩ(500VDC)

          Cautions of Latching Relay:

             1. Suggestions of relay's input
            (1) Polarity- Please check the polarity inside of our technical specification, if a single coil then"+ -" or "- +"is fine,

            you can change it with one pulse. If double coil then it's necessary to confirm "-+-" or "+-+" before leaving our factory.

            (2)Driving-Please energize the relay at our recommended pulse width, and rated voltage for reliable performance of 1.5

            times or 2 times of value or lower driving condition plz confirm with our engineer.
            (3) Contact status may be changed during transportation or installation due to the impact of external force,
            therefore please reset to the required status.

 

            2. Suggestions for the relay's output
            (1)When choosing the relay with a hard connection, please avoid the external force on load terminals during or after

            the installation.

            (2)When the relay will be connected with screws or bolts to the relays' terminals, plz make sure your connection is

            fastened and prevent the relay from damage or other safety problems due to temp. Rise..

            (3)The sampling signal wires of products are limited, please do not pull or torque during installation.