DIN Rail Mount 200A 40-400V Digital Shunt RS485 Smart DC Energy Meter for Solar Panel

• Customization: Available
• Display: Digital
• Installation: Direct Connected
• Model NO.: EM613001
• Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Maximum Demand Meter
• Electric Equipment: Single-phase
• Theory: Electronic Meter
• Power Meter Connection: Terminal
• Measured Signal: Pulse Peak
• Type: Energy Meter
• Certification: RoHS, ISO, CE
• Customized: Customized
• Product Name: DC Solar Energy Meter with 100A Shunt
• Material: PC, ABS
• Communication: RS485 Communication
• Communication Protocol: Dtl645
• Accuracy Class: Cl.1
• LCD Display: LCD 6+2
• Reference Voltage: DC40V-400V
• Standard Compliant: GB/T 17708-2017 Static DC Energy Meter
• Ref. Current: 10~240A
• Relative Humidity: 95%
• Transport Package: Bag Box Carton Pallet
• Specification: 150*36*80.5mm
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 9028301300
• Production Capacity: 800, 000.00/ Month

Product Description

Product Description

EM613001 is used to monitor and control DC system. They also support shunt sampling, over current/over voltage alarm, digital output,                                   
net metering and communication functions. All the measured data and status can be read through RS485 communication interface with
DTL645/Modbus-RTU protocol.

Detailed Function

 

Specification	Type	Din Rail DC Measuring Device
	Reference voltage	DC40V-400V
	Current	10~240A
	Operation temp.	-20ºC~+70ºC
	Accuracy class	Cl.1
	Average humidity	75%
	Relative humidity	95%
	Communication	RS485 Communication
	Communication protocol	DTL645
	Impulse constant	100 imp/kWh
	LCD display	LCD 6+2
	Power consumption	≤0.4W,≤8VA
	Standard compliant	GB/T 17708-2017 Static DC Energy Meter

Cautions of DC type Din Rail Meter:

1.About AC/DC & Application
(1) AC- Generally speaking alternating current usually means the input voltage , for example 220/230Vac for house appliance, 380Vac.
However DC for industrial field. In a word AC type energy meter is necessary when measuring in such condition.
(2) DC- Comparing with AC type meter, or AC whole current static energy meter, DC type Din Rail Meter was mainly used for direct current
measuring. It also means not for household and it;scarce.
(3) The application of DC din rail meter mainly exist where power storage for example power storage system, power generator, battery
system etc. It was also used for recharging such as EV charging pile.
 

2.About Function
(1) Measuring- current measuring achieved by shunt sampling which is cost-efficient and of good accuracy.
(2) Communication- RS485 Communication or RS485 & NB-IOT communication optional, which can also serve as DCU -sending data to the icloud.
(3) Tariff-4 tariffs with 8 slots.

3.Cautions

(1)Installation-Experienced electricians or professionals are required to install electricity meters and make sure that you have read this user guide.
In the process of installation, if the cover has obvious damage marks caused by severe impact or fall, please do not install or power up, and contact
with us immediately;Electricity meters can be installed and used directly if they pass the inspection before leaving the factory;The electricity meter
should be installed in the indoor or outdoor electricity meter box.The mounting base shall be fixed on a solid fire-resistant wall, and there shall be
no corrosive gas in the air;Electricity meters should be wired according to the wiring diagram on the terminal.Copper wire or copper wiring connector
are the best ways to access.

(2)Sealing- Plz fasten the sealing bolts or seals after installation in case of tamper events.

(3)If you have further questions while using plz contact us any time.