Thin Relay Small Dual Coil Relay 12VDC 90A Magnetic Relay Bistable Latching Relay

• Customization: Available
• Theory: Electromagnetic Relay
• Usage: Household Appliances Relay, Energy Meter, Industrial Control, EV Charger
• Model NO.: IM901D
• Phase: 2
• Electricity Type: Ac
• Number of Pole: 2
• Load: High Power Relay
• Protective Characteristics: Enclosed Relay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Product Name: 90A 250VAC Power Latching Relay
• Rated Load: 90A, 250VAC
• Contact Material: Agsno2
• Coil Voltage: 6~24VDC
• Color: Black
• Transport Package: Cartons/Pallet
• Specification: 60*34.5*19mm
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Parameter Category	Parameter	Value/Specification
General Parameters	Main Dimensions	60 * 34.5 * 19 mm
	Weight	80g (excluding peripheral accessories)
	Operating Temperature	-40 to +85 °C
	Operating Humidity	45% to 95% RH
Contact Parameters	Contact Material	AgSnO2
	Contact Form	2A or 2B (2 sets of Normally Open or Normally Closed)
	Contact Resistance	≤ 0.8 mΩ (initial value, @DC 6~24V, 1A)
	Maximum Switching Current	90A
	Maximum Switching Voltage	250VAC
Performance Parameters	Rated Coil Voltage	DC 6, 9, 12, 24V
	Pulse Duration	100ms ~ 200ms (recommended)
	Rated Coil Power	2.5W (single coil), 5W (dual coil)
	Pick-up Time	≤ 30ms
	Release Time	≤ 30ms
	Electrical Life	10,000 operations (purely resistive load, 90A 230VAC)
	Mechanical Life	100,000 operations
	Insulation Resistance	1000 MΩ (500VDC)
	Coil to Contacts	4000VAC, 50/60Hz, 1 min
	Between Different Contact Groups	4000VAC, 50/60Hz, 1 min
	Across Open Contacts of Same Group	2000VAC, 50/60Hz, 1 min
	Short-Circuit Current Withstand	4500A (50/60Hz), ~10ms (non-explosive)
	Shock Resistance (Functional)	100 m/s² (10G)
	Shock Resistance (Destructive)	1000 m/s² (100G)
	Vibration	1.5mm (double amplitude), 10~55Hz

          Cautions of Latching Relay:

             1. Suggestions relay's input
            ( Polarity- Please check the polarity inside of our technical specification. If it is single coil, then"+ -" or "- +"are fin.,

            You can change it with one pulse. If double coi,l then it's necessary to confirm "-+-" or "+- +"before leaving the factory.

            (2) Driving- Please energize the relay at our recommended pulse width, rated voltage for reliable performance, if 1.5

            times or 2 times the value or lower driving condition plz confirm with our engineer.
            (3 The relays ' ) contact status may be changed during transportation or installation due to the impact of external force,
            Therefore, please reset it to the required status.

 

            2. Suggestions for relay's output
            (1)When choosing the relay with a hard connection, please avoid the external force on load terminals during or after

            the installation.

            (2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is

            fastened and prevent relay from damages or other safety problems due to temp. Rise..

            (3)The sampling signal wires of products are limited; please do not pull or torque them during installation.