Three-Phase DC9V Single Coil Magnetic Latching Relay 120A Double Coil 24V New Energy Charging Pile Relay

• Theory: Electromagnetic Relay
• Usage: Household Appliances Relay, for Energy-Saving, Remote Control, Energy Meter
• Phase: 3
• Electricity Type: Dc
• Number of Pole: 3
• Load: High Power Relay
• Model NO.: IM1201T
• Protective Characteristics: Enclosed Rlay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Product Name: Strong Anti-Shock 3-Phase Mechanically Latched Con
• Contact Material: Agsno2
• Rated Load: 120A, 250VAC
• Coil Voltage: 5/6/12/24/36VDC
• Color: Black
• Transport Package: Cartons/Pallet
• Specification: 78.6*40.3*37.8mm
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Three-phase DC9V single coil magnetic latching relay 120A double coil 24V new energy charging pile relay

Application scenarios: 1. Family scenario.

Using the IM1201T, 120A, three sets of latching relays on a 12-volt discharge controller can provide high ampere current (60A) to ensure battery safety and avoid discharge to very lethal low voltage levels. Used to protect 12-volt battery systems from discharging below a previously set low voltage level

Basic Data	Dimension(mm)		78.6×40.3×37.8
	Weight ( g )		TBD
	Contact Arrangement		3A/3B
	Contact Material		AuAg
	Ambient Temperature		-40~+70ºC
	Ambient Humidity		TBD
	Vibration		10~55Hz,1.5mm(DA)
Specification Data	Nominal Voltage		5~48VDC
	Power Consumption		Single Coil:3.0W, Dual Coil:6W
	Max. Switching Voltage		250VAC
	Max. Switching Current		120A
	Max. Switching Power		30000 VA
	Contact Resistance		<2.0 mΩ
	Insulation Resistance		1000MΩ(DC 500V)
	Dielectric Creepage		8mm
	Dielectric Strength	Across Open Contact	>2000VAC   1min
		Coil to Contact	>4000VAC   1min
	Electrical Life		>10,000cycles
	Mechanical Life		>100,000cycles
	Picking-up & Release Time		<=30ms
	Pulse Duration		>=100ms
	Functional Shock Resistance		10G
	Destructive Shock Resistance		100G

  Application precautions of magnetic retaining relay

1. The factory status of the magnetic retaining relay is usually contact closed, but may change due to factors such as transportation or impact during relay installation.Therefore, it is necessary to take measures to reset the contacts before use.

2. In order for the relay to operate reliably, the voltage applied to the coil must reach the rated voltage and the pulse width must be more than three times the operating time.

3.Magnetic Relay coils are polar differentiated and coil polarity must be specified when ordering.

4. The shape and installation size of magnetic retaining relay can not be changed generally. During selection, attention should be paid to whether the relay shape size meets the requirements.The peripheral accessories of the relay are customizable.For double-hard-connected products, one side of the lead-out conductive strip must be flexible; if both sides are rigid, the relay is prone to high stress after installation, which may change the parameters of the relay.