Anti-Magnetic Field 40A 250VAC Coil 24VDC Latching Relay

• Model NO.: IM-NE801A
• Protective Characteristics: Enclosed Rlay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Rated Load: 40A, 277VAC
• Coil Voltage: 12VDC
• Contact Load: Cc2
• Contact Material: Agsno2
• Certificate: UL,TUV,IEC 61810-1 IEC 61851-1 IEC 62955
• Contact Form: 2A
• Transport Package: Cartons/Pallet
• Specification: 26.5*23.5*15mm
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Product Feature:

1,Mounting type: PCB mounted through hole
2,Contact arrangement: 2 form A (NO)
3,Rated coil voltage: 12VDC- Maxmum contact voltage: 277VAC
4,Contact gap: 3mm (@4kV Withstand Voltage)
5,Number of operations: 50 000 cycles @32A, 230-250V
6,Contact resistance/load category: CC2
7,Short response time
8,Comply with UL, TUV certified, IEC 61851-1/IEC 61810-1/IEC 62955 standard
9,The contact spacing is large and the withstand voltage reaches 4500Vac.
10,suitable for American/EU standard charging piles

Specification	Weight		=70g
	Continuous Current		40A
	Contact Form		2A
	Contact Material		AgSno2
	Max.Switching Voltage		277VAC
	Initial Contact Resistance		10mΩ(at 20A)
	Insulation Resistance		100mΩ, at 500vdc, 50%RH
	Mechanical Endurance		1x10^6ops
	Electrical Endurance		5x10^5ops
	Dielectric withatanding voltage	Across Open Contact	4000VAC  1min
		Coil to Contact	801:3000vac  1min
			801A:4000vac  1min
	Environment Temperature		Operation:-40ºC~85ºC
	Vibration		10-40Hz,DA1.27mm, 40-70Hz:5g
	Shock Resistance		20g,11ms
	Dielectric Strength		500Vrms, 1min

        Cautions of Latching Relay:

             1.Suggestions of relay's input
            (1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,

            you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.

            (2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5

            times or 2 times of value or lower driving condition plz confirm with our engineer.
            (3)Relays'contact status may be changed during transportation or installation due to impact of external force,
            therefore please reset to the required status.

 

            2.Suggestions of relay's output
            (1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after

            the installation.

            (2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is

            fastened and prevent relay from damages or other safety problems due to temp. Rise..

            (3)The sampling signal wires of products are limited, please do not pull or torque during installation.