Russia Popular Mini Rele 100A 250VAC Space Saving Motor Driven Relay for Energy Meter

Product Description

Basic Data	Dimensions(mm)		29×23.5×16
	Weight ( g )		≈40g
	Contact Arrangement		1A/1B
	Contact Material		AgSnO2
	Ambient Temperature		-40~+75ºC
	Vibration		10~50Hz,1.5mm
	Shock		1000m/s²,(100g)
Specifications Data	Power Consumption		<3W
	Operating Voltage		10.5-16V
	Max. Switching Current		100A
	Surge Current		6000A/10ms
	Motor Resistance		32(1±15%)Ω
	Contact Voltage		<60mV
	Contact Resistance		≤1.0mΩ
	Dielectric Strength	Motor to Contact	>4000VAC,50/60Hz 1min
		Across Open Contact	>2000VAC,50/60Hz 1min
	Electrical Life(120 cycles/H)		10,000(resistance 5k + perceptual 5k, coϕ=0.5)
	Mechanical Life(3600 cycles/H)		100,000
	Pulse Time		≥60ms(Advise 60ms~100ms)
	Picking-up Time		≤60ms
	Release Time		≤60ms
	Insulation Resistance		>1000MΩ(500VDC)

         Cautions of Latching Relay:
             1. Suggestions for relay's input
           (1) Polarity- Please check the polarity inside our technical specification., If a single coil, then"+ -" or "- +"is fine;

                You can change it with one pulse. If double coil, then it's necessary to confirm "-+-" or "+-+" before leaving our factory.

           (2) Driving- Please energize the relay at our recommended pulse width  and rated voltage for reliable performance of 1.5

                Please confirm with our engineer at times or 2 times of value or lower driving conditions
           (3) Contact status may be changed during transportation or installation due to the impact of external forces
                Therefore, lease reset to the required status.

 

            2. Suggestions for the relay's output
           (1)When choosing the relay with a hard connection, please avoid the external force on load terminals during or after

               the installation.

           (2)When the relay will be connected with screws or bolts to the relays' terminals, plz make sure your connection is

              fastened and prevent the relay from damage or other safety problems due to temperature rise.

           (3)The sampling signal wires of products are limited; please do not pull or torque during installation.