MD0630t41A-1 IEC62955 EV 6mA DC 30mA AC Leakage Protection RCD Monitor Residual Current Sensor

• Type: Electromagnetic
• Output Signal Type: Digital Output
• Production Process: Integration
• Material: Plastic
• Application: Residual Current Detection
• Certification: CE,TUV,RoHS
• Model NO.: MD0630T41A-1
• Customized: Customized
• Product Name: 6mA 30mA AC DC Residual Current Protective Sensor
• Measurement Current Range: DC Current:2~15mA ; AC Current:3~100mA
• Three-Ways Output: DC Alarm, AC Alarm, AC/DC Alarm
• Function: Current Value Readable and Settable
• Theory: Current Sensor
• Installation: Cable/Horizontal Type
• Application Scence: EV Charger, Solar PV System, DC Panel
• Certificate: TUV-IEC, CE-EMC
• Appearance: Plastic Casing, SIP Encapsulation
• Transport Package: Cartons
• Specification: TBA
• Trademark: IVY
• Origin: Zhejiang, China
• HS Code: 8536411000
• Production Capacity: 5, 000, 000.00/ Year

Product Description

Voltage	12V±20%
Current	DC current 2~15mA, AC current 3~100mA
Accuracy	DC±0.2mA, AC±0.3mA @ 25ºC
3 Ways Output	DC alarm, AC alarm, AC/DC alarm
Operation Temperature Range	-25~+80ºC
Installation	Cable/Horizontal Type
Certification	TUV-IEC Standard, CE-EMC
Plastic Casing	SIP encapsulation

 
Cautions of Leakage Sensor:

MD0630T41A-1 is an AC DC leakage current sensor (residual current device) for EV charging station. It has the characteristics of high sensitivity, correct measurement, small size and compact/integration design. The residual current monitor can be set separately for AC and DC leakage. When leakage current is detected, an alarm signal is generated, and the switch control signal is output at the same time. The RCM sensor is connected in series with the AC supply to an EV and will provide a signal output if a DC current ≥ 6mA DC flows in the circuit. It will protect against DC (6mA) and AC (30mA) residual currents, and will signal to the Smart EVSE if a fault occurs.

 

To satisfy new standards including IEC 62752, IEC 62955, IEC 61851-1 etc, the charging of electrical vehicles requires residual current sensors to avoid hazardous situations in cases where the vehicle battery (DC) is connected to the home power supply (AC). This is new type of Fluxgate Current Sensor; it's based on the principle of magnetic modulation. It can be used to measure leakage currents including DC, AC, and AC and DC stacks, generally used as a DC leakage current detection and protection in equipment that uses DC operation. 

 

MD series sensor are type B RCD/RCM, which are used where DC residual currents could occur, in addition to normal AC, can detect high-frequency AC and pure DC earth leakage currents. The tripping conditions are defined with different frequencies from 50Hz to 1kHz. Reducing the risk of fire or electrocution through output digital alarm signal. Type B RCD is suitable for loads with single/three-phase rectifiers, such as variable speed drives, photovoltaic systems, electric vehicle charging stations and medical equipment etc.